衬氟18dj18大奖娱乐手机系列   蝶阀系列   平板18dj18大奖娱乐手机系列   球阀系列   水力控制阀系列   脱硫18dj18大奖娱乐手机系列   18dj18大奖娱乐手机系列   截止阀系列   止回阀系列  
球阀系列产品
Q47系列固定球阀
Q41系列浮动球阀
三通球阀
Q41系列浮动式金属密封球阀
BQ41系列侧装式双偏心半球硬密
Qv系列金属硬密封球阀
 
Q40系列上装式偏心半球阀
结构特点及用途Structural features and purposes
  本系列18dj18大奖娱乐手机除具有普通球阀流阻小、启闭迅速、密封性能好等优点外,还具以下特点:
  1、本阀采用偏心结构,18dj18大奖娱乐手机在关闭过程中,阀座与球体间的密封比压迅速增加,从而确保了密封副的可靠密封。当18dj18大奖娱乐手机开启时,阀座与球体迅速脱离,有效的减小了操作力矩,并使阀座表面与球冠球面间的擦伤可能性降到最低。
  2、压力损失小,全开时损失为零,流道完全畅通,且介质不会沉积在阀体中腔内。
  3、使用寿命长,18dj18大奖娱乐手机无易损部件,由于偏心的作用,18dj18大奖娱乐手机启闭时无摩擦,使18dj18大奖娱乐手机的寿命大大延长。
  4、维修方便,球冠和支承体从18dj18大奖娱乐手机上部装入,检修时只需打开阀盖吊出球冠和支承体而不必将整个18dj18大奖娱乐手机从管道上卸下来,这给地下管线,特别是原子能工业用球闯带来很大方便。
  5、本系列18dj18大奖娱乐手机体积小,重量轻,具有双向止水功能,广泛适用于水、蒸汽、煤气、天然气、油品及含微小国体颗粒等场合
  In addition to the features with the common ball valve of small fluid resistance,quick open-close and good tightness,this series valve also holds those below:
  1、This valve uses an eccentric structure During the valve close,the specific pressure of the seal between both seat ring and ball is fast increased,thus making sure of reliable sealing of the seal pair and,when the valve is opened,both seat ring and ball are quick separated,thus effectively reducing the operation torque and making the possibility of the scrapping damage between the seat ring surface and the spherical crown surface to the minimum.
  2、Small pressure loss,to be zero at full-open Completely unblocked runner and the medium will not be deposited in the mid-cavity of the aody.
  3、Long duration No easily wearable parts with the valve and,because of the eccentric action,no friction at open-close,making the valve long endurable.
  4、Convenient repair Both spherical crown and support body are mounted in from the top of the valve and,at repair,iust open the valve cover to take the both while no need to have the whole valve removed from the pipeline This b rings a great convenience to the underground pipeline especially for the ball valve used for the atomic energy industry.
  5、Small volume and light weight,of the function to stop water in dual-ways,applicable for water,steam,coal gas,natural gas,oil goods and the medium containing micro solid grains.
执行标准Executive standards
一、设计和制造Design and manufacture:GB、Tl2237-1989
二、检查和试验Check andtest:GB/Tl3927-1992;JB、T9092-1999
三、法兰连接Flange connection:JB/T78~79-1994
四、结构长度Structural length:QB/SG03-2002(enterprise standard) (企业标准)

主要零件材料Main parts materia

零件名称Part name 材料Material
阀体、阀盖、支架
Body,bonnet,Support
WCB ZG1Crl8Ni9Ti ZGOCrl8Nil2Mo2Ti
球体Sphere ZG2Cr13镀硬铬 ZG1Crl8Ni9Ti ZGOCrl8Nil2Mo2Ti
阀杆Setm 2Cr13 1Crl8Ni9Ti OCrl8Nil2Mo2Ti
阀座Seat 2Crl3/橡胶 1Crl8Ni9Ti/橡胶 OCrl8Nil2Mo2Ti/橡胶
填料Packing 柔性石墨/PTFE
螺栓Bolt 35 1Crl7Ni2 1Crl7Ni2
螺母Nuts 45 0Crl8Ni9 0Crl8Ni9

主要性能规范Main performance standards                            单位:MPa

公称压力PN 最高使用压力
Working Pressure
试验压力Test pressure
强度试验压力
Strength test pressure
密封试验压力
Sealing test pressure
气密封试验压力
Gas seal test pressure
1.0 1.0 1.5 1.1 0.6
1.6 1.6 2.4 1.76 0.6

 [1] [2]  下一页